Do I need to turn off the water supply to the washing machine after washing?

Do I need to turn off the water supply tap to the washing machine after washing.pptxMany users wonder: is it necessary to turn off the water when the washing machine has already finished its work? Of course, most people never do this, but it can have serious consequences. In this article we will try to figure out what's what.

To cover or not to cover?

Why do you need to turn off the water supply tap to the machine? After all, this is even written in the instruction manual. But because the inlet valve that supplies water to the machine and stops it does not last forever. It is designed for temporary use, and not for permanent use. Therefore, if the valve is constantly under pressure, there is a high probability that:

  • the locking spring will weaken, and this will affect the tightness of the membrane:
  • The rubber valve gasket can wear out due to constant stretching, which will lead to a powerful breakthrough and flooding of neighbors.

A shut-off spring is a device that instantly responds to a drop in pressure in the tube. The situation is complicated, as a rule, by the fact that the valves fail more often at night due to higher pressure and take the owners of the machine by surprise. Therefore, make it a rule to stop feeding at least when you go to bed or leave the house, in order to avoid surprises.

Attention! Manufacturers of washing machines are not responsible for valve malfunctions if the water supply was not stopped during the breakdown.

the valve is loose and leakingWhat to do if it is difficult to get to the tap? It can be hidden between the machine and the wall or hidden in a closet. Constantly moving the unit is not an option, because it is physically difficult and takes some time.It is better, of course, to keep the faucet in sight. For example, you can move the washing machine a little away from communications so that taps and wires are not too noticeable, but can be easily reached.

Yes, valve failure is a matter of chance. It happened that a part served for ten years without shutting off the water supply after washing, and it happened that, if all recommendations were followed, it failed after six months.

Aquastop - salvation from flooding

washing machine with aquastop hoseWhat is the Aquastop system in a washing machine? This is a special additional hose that is already built into the washing machine. Unlike a conventional water supply, which can withstand 10 bar, it can withstand up to 70. In addition, the system is equipped with a special solenoid valve, which instantly shuts off the water supply to the machine in the event of a leak. Moreover, Aquastop works even during washing, so you don’t have to urgently try to turn off the water supply tap to the washing machine, the valve will do it for you.

How it works? A machine with the Aquastop system also has a special tray located deep inside. When water accumulates there, a sensor is triggered, which gives the valve a signal to stop pumping water.

In addition, Aquastop can stop the water supply even if you overdo it with detergent. But why? The fact is that when the product comes into contact with water, foam forms. And in large quantities it will overfill the tank and begin to quickly come out, risking damage to the electronics.

However, you should not constantly rely on Aquastop. After all, any system has costs and can misfire. It is better to follow all recommendations for operating the machine. To the question “to turn off the tap or not to turn off”, the answer is obvious.As you can see, you shouldn’t overdo it with detergents either, it can end badly for your washing machine. Yes, there are times when hoses break for no apparent reason due to a manufacturing defect or something else. But you can only claim a guarantee if you have followed all the rules for shutting off the water.

   

Reader comments

  • Share your opinion - leave a comment

Add a comment

We recommend reading

Washing machine error codes